500mm high meshed extension panel - to give added height to both 2.0m and 2.4m fencing ranges. Easily slotted into the top of the panel and coupled together, offering a quick and easy way of increasing the height of our panel. These can be manufactured out of both corrugated and profiled sheet if you do require a solid infill. (Careful of wind loading).
Barbed Wire Brackets
Fitted to the top of panels to increase the overall height and give added security. Supplied as a cranked (angled) bracket or vertical upright bracket. (Barbed
wire not supplied).
Ground Skirts
Attached to the bottom of the panel, these units fill in the gap between the hoarding and the ground when the base units are sited in ballast blocks.
Infill Panels
Fitted to conceal the gap between two panels to provide extra privacy. Supplied plain as standard but can be finished in corporate colours if required.
Strips
Supplied as standard in 150mm or 300mm. A flat steel strip, painted the colour of your choice, normally fixed at the top, middle or bottom of the panel.
Specialised stabilisers and block trays
This is made from 4.0mm steelto give you a platform onto which extra ballast can be loaded. Bolted to a stabiliser this is a very quick and easy solution for extra wind loading.
Blocks
We supply both rubber and concrete blocks in various weights.
Scaffold to channel bracket
Utilised as part of our ‘InGround’ system and fitted at the top and bottom of the fencing panel. Useful where room is paramount.
Couplers
Made from 3.0mm pressed steel, these connect the hoarding and mesh fence panels together. Can also be used on pedestrian barriers.
Also Available
Ground pins, block retaining clips, stabiliser bars, anti lift brackets, gate hinges, base plates.